Product

2-HOLE LAVABO FAUCET SHB0010

2-HOLE LAVABO FAUCET SHB0010

The use of environmentally friendly products, especially products that come in direct contact with water sources such as shower, dishwashing faucet, etc., will help reduce the health risks. Son Ha premium shower is manufactured according to European technology and standards on the world’s most advanced technology line, helping to protect consumers’ health.

– Friendly and safe material for health

– Smart hot and cold valve

– Outstanding durability

– Luxury and high-class design

– 5-year warranty.

1,700,000₫

PRODUCT CHARACTERISTICS

OPERATING CONDITIONS

1. Water supply pressure: 0.05-0.75 Mpa

2. Test pressure: P = 1.75 Mpa

3. Input hot water temperature: t <85¬C

4. Ensure that water supply is clean, free from sand and gravel, impurities …

USER MANUAL

1. Move up the handle on the top to start opening the water valve, move the handle down to close the water valve. When you want to use hot water, turn the handle to the left, and turn the handle to the right to use cool water.

2. When adjusting the hot water temperature, turn the hand to the position of the cold water, then slowly turn to the position of hot water to adjust the hot water temperature accordingly.

MAINTENANCE

Need to check and maintain to be able to use well and increase product life.

1. With dirt on the surface, wash with water, then wipe with dry and soft wiper.

2. Do not use the following items because it is possible to scratch and damage the surface of the faucet:

           – Detergent with particles

– Acid and chlorite salt detergent (bleach)

– Types of brushes with hard materials

– Nail polish remover or Benzene solution

PROBLEMS AND TROUBLESHOOTING

PROBLEM

REQUIRED INSPECTION

SOLUTION

Small flow

Water source valve is opened or not

Open the water source valve to increase gradually

There is any obstacle?

Open the nozzle, discharge cleanly waste with water or remove the obstacle

Water leakage

Control valve is loose or broken or not?

Tighten again the screw cover of control valve, or replace valve

Dirty handle

It is loose or not

Tighten screw to fix the handle

Hotline: 1800 6566
Service Center:
+ North: (+84) 4 62 65 65 86
+ South: (+84) 8 22 15 32 19

INSTALLATION INSTRUCTIONS

1. Before installing, clean the inside of the water pipe by flushing water to the inside of the pipe.

2. Install the water tap into the lavabo basin or countertop, adjust the faucet position to the front, fix the body of the faucet with lavabo basin or countertop with bolts and gaskets. Do not tighten too tightly because it may break the plastic nut.

3. Use a water supply hose to connect the water supply hose to the thread G1 / 2 on the opposite side of the water faucet install a red soft pipe on the left and, install a soft blue pipe on the right, turn the handle to the left for hot water and turn the handle to the right for cool water.

NOTES FOR INSTALLATION

1. The faucet has been rigorously tested at the laboratory during fabrication. Please do not arbitrarily open it.

2. After installation, check whether the joints are fully connected, if the pipe is leaking.

Please contact us for advice:
Son Ha International Corporation
Lot CN1, Tu Liem Industrial Zone, Minh Khai, Bac Tu Liem Dist, Hanoi, Vietnam.
Hotline: 1800 6566

CÁC SẢN PHẨM LIÊN QUAN