SHOWER SHS0070
SHOWER SHS0070
Giá sản phẩm : 1990000
The use of environmentally friendly products, especially products that come in direct contact with water sources such as shower, dishwashing faucet, etc., will help reduce the health risks. Son Ha premium shower is manufactured according to European technology and standards on the world’s most advanced technology line, helping to protect consumers’ health.
- Friendly and safe material for health
- Smart hot and cold valve
- Outstanding durability
- Luxury and high-class design
- 5-year warranty.
PRODUCT CHARACTERISTICS
OPERATING CONDITIONS
1. Water supply pressure: 0.05-0.75 Mpa
2. Test pressure: P = 1.75 Mpa
3. Input hot water temperature: t <85C
4. Ensure that water supply is clean, free from sand and gravel, impurities …
USER MANUAL
1. Move the handle upwards to start opening the water valve, move it down to close the water valve. When you want to use the hot water, turn the handle to the left, and turn to the right to use cool water.
2. When adjusting the hot water temperature, turn the handle to the position of cold water, then slowly turn towards the position of hot water to adjust the hot water temperature accordingly.
3. How to use the water division button
Lift up to use the shower. When the water is turned off or the pressure is weak, the water division valve will automatically drop. If you want to fix the position of shower, lift and rotate.
MAINTENANCE
Need to check and maintain to be able to use well and increase product life.
1. With dirt on the surface, wash with water, then wipe with dry and soft wiper.
2. Do not use the following items because it is possible to scratch and damage the surface of the faucet:
- Detergent with particles
- Acid and chlorite salt detergent (bleach)
- Types of brushes with hard materials
- Nail polish remover or Benzene solution
PROBLEMS AND TROUBLESHOOTING
|
PROBLEM |
REQUIRED INSPECTION |
SOLUTION |
|
Small flow |
Water source valve is opened or not |
Open the water source valve to increase gradually |
|
There is any obstacle? |
Open the nozzle, discharge cleanly waste with water or remove the obstacle |
|
|
Water leakage |
Control valve is loose or broken or not? |
Tighten again the screw cover of control valve, or replace valve |
|
Dirty handle |
It is loose or not |
Tighten screw to fix the handle |
Hotline: 1800 6566
Service Center:
+ North: (+84) 4 62 65 65 86
+ South: (+84) 8 22 15 32 19
INSTALLATION INSTRUCTIONS
1. See the main faucet body installation drawing based on the installation size, in the wall, the hot water pipe, cold water pipe are available and the installation hole is at the proper height. The pipe and center distance must match the product that the two water pipes must be balanced.
Wrap the bandage on the Z-leg, tighten the Z-shaped head into the inner threaded hose. Then, tighten the decorative cap to the elbow, then attach the rubber pad to the Z-leg and insert the main body into the elbow.
2. Fix the shower base and install the shower (as shown below)
Installation of shower base:
- The shower base from the height of the central main body must be defined based on the actual situation.
- After completing the actual installation, it is based on the size of the left side of the picture below to clearly indicate the two drill holes and insert one screw hole into each hole then use the screw to install
- Installation of shower:
- Use a shower soft pipe connected to the main body and shower (need to tighten until there is no leakage), shower is hanged on the shower base.
- After completing the installation work, check the connection points to see if there is a water leak and if it is tightened or not.
